Noden Adjust-A-Bench

This is my almost ultimate assembly table. It's a Noden Adjust-A-Bench. I could NOT live without this. Why? Because it is BIG, 4' x 8' with plenty of room for everything you need and within arms reach. It's built from 2 sheets of 3/4This is my almost ultimate assembly table. It adjusts height wise from below my waist to chest height (I’m 5’11”) via a Noden Adjust-A-Bench mechanism. I could NOT live without this. Why? Because not only is it height adjustable, it’s a BIG, 4′ x 8′ with plenty of room for everything you need and within arms reach. It’s built from 2 sheets of 3/4″ ply screwed to a 2×6 frame, and it is nearly dead flat. The Noden Adjust-A-Bench legs are the better part of $500 with shipping and is built from VERY heavy gauge steel, and it’s worth every penny. If you’re worrying about wobble, there is very little, especially at the lower or mid height settings (there are about 12 height settings). You can plane on it, pound on it, put heavy lumber on it, cover it with builder’s paper and use it for finishing, etc. I use it a LOT for assembly. I built my own stretchers and added levelers and casters to save some money, but you can buy them from Noden if you like. Here’s some more photos: